To start the charging process :
Fully insert your adapter into the vehicle.
Fully insert the NACS charging handle into the adapter.
If your vehicle is compatible with Plug & Charge, the charging process
should start by itself within a few seconds
If not :
Initiate the charging process through the charging station’s app or the
vehicle’s infotainment.
To stop the charging process :
Stop the charging process through the app, the vehicle or the NACS
handle stop button.
Make sure the charging process has completely stopped.
Unplug the NACS plug from the adapter.
Unplug the adapter from the vehicle using the
top latch.
HOW TO USE :
Page 7
To Next Page
Loading...