To Next Page

To Previous Page

RotoClone® W

this document contains, without permission of American Air Filter

Company, Inc., is prohibited. RotoClone, AAF, REDClean, REDFiltration,

and Reliable Efficient Durable are registered trademarks of American Air

Filter Company, Inc. d/b/a AAF International.

3. Bolt RotoClone outlet connection to RotoClone outlet. Be sure that the

bottom of the outlet piece is even with the bottom of the RotoClone outlet

and that no gasket material is protruding inside as this will cause water

carryover.

4. Bolt RotoClone to pre-cleaner top. (Note: On RotoClone sizes 8 and

10, RotoClone® is shipped assembled to pre-cleaner and hopper.)

5. Bolt pre-cleaner outlet connection to pre-cleaner section. (Note: On

RotoClone sizes 8 through 16, the pre-cleaner outlet connection and pre-

cleaner are shipped assembled.)

6. Bolt RotoClone inlet connection to RotoClone inlet and pre-cleaner

outlet connection.

7. Connect hose from water drain in RotoClone outlet connection to

nipple provided in hopper using fittings provided.

Questions and Answers:

Need help?

Do you have a question about the AAF RotoClone W and is the answer not in the manual?

AAF RotoClone W Specifications

General