A&D AD-4405 User Manual

80 pages

To Next Page

Weighing Indicator

WM+PD4000504

Default Chapter3
- Table of Contents3
1 Compliance5
- Compliance with FCC Rules5
- Compliance with European Directives5
2 Introduction6
3 Installation and Precautions7
- The Load Cell Connections7
- Adjustment of the Load Cell Output8
- Verifying Load Cell Output and Input Sensitivity8
- Installing an Option Board9
4 Description of Panels and Symbols10
- Front Panel Description10
- Rear Panel Description11
- Other Displays and Symbols11
- Accessories and Options12
5 Calibration13
- Items of Calibration Mode13
- Calibration Procedure14
- Weighing Range Function19
  - Setting the Division and Range20
- Digital Linearization Function20
- Gravity Compensation Function21
  - The Gravity Acceleration Table22
- 5.6. Calibration Error Code List23
6 Functions24
- Changing the Function Settings24
- 6.2. F-Functions25
- CF-Functions34
7 Tare35
- Weighing Tare35
- Digital Input (Preset Tare)35
- Clearing Tare35
8 Accumulation36
- Preparation and Specifications36
- Display and Operation37
9 Code Memory39
- Using Code Memory39
10 Comparison40
- Weight Check Mode40
  - Condition Formula for Comparison41
  - Setting the Upper/Lower Limit Values42
- Setpoint Comparison43
11 Hold Function46
- Setting the Hold Functions46
12 Counting Function48
- Using the Counting Function48
- Unit Weight Registration48
13 Calendar / Clock50
- Time and Date Functions50
- Setting Time and Date51
14 Internal Printer (OP-06)53
15 Common Printer and Data Output Items55
- Data Output / Print Mode55
- Data Number56
- Interval Data Output / Print56
  - Setting the Interval Time57
  - Interval Data Output / Print Output57
16 RS-232C Interface58
- Specifications58
- Data Format59
- Command Format60
- UFC Commands66
17 RS-422/RS-485, Relay Output(OP-03)68
18 Relay Output & Control Input (OP-05)70
20 Ma Analog Output (OP-07)71
20 Current Loop Output (OP-08)72
21 Specifications74
- Dimensions75

Need help?

Do you have a question about the A&D AD-4405 and is the answer not in the manual?

A&D AD-4405 Specifications

General

Brand	A&D
Model	AD-4405
Category	Accessories
Language	English

Summary

3. Installation and Precautions

5. Calibration

Calibration Procedure

Step-by-step guide for setting up instrument and calibration.

Configuring a Weighing Instrument

Sets capacity, resolution, decimal point, range, and units.

Zero and Span Calibration

Procedures for adjusting zero point and capacity.

6. Functions

F-Functions

Lists and describes various operational functions (Filter, Zero tracking, etc.).

10. Comparison

12. Counting Function

15. Common Printer and Data Output Items

16. RS-232C Interface

19. 4-20mA Analog Output (OP-07)

21. Specifications

Related product manuals