To Next PageTo Next Page
Need help?Do you have a question about the A&D GX-1003A and is the answer not in the manual?
General| Model | GX-1003A |
|---|---|
| Capacity | 1000 g |
| Calibration | External Calibration |
| Stabilization Time (FAST) | 1.5 seconds |
| Power Supply | AC adapter |
| Interface | RS-232C |
| Units | g, oz, lb, ct |
Details the balance's self-check, impact detection, data memory, GLP/GMP output, and more.
Step-by-step instructions for setting up the balance, including leveling and connecting power.
Guidelines for optimal performance, including environment, stability, and calibration.
Lists available weighing units and modes, with abbreviations and conversion factors.
Step-by-step guide to performing basic weighing operations, including taring.
Explains automatic calibration triggered by ambient temperature changes for GX-A series.
Details the one-touch calibration process using the balance's internal mass.
Step-by-step guide for performing calibration using an external calibration weight.
Procedure for testing weighing accuracy with an external weight, outputting results.
Step-by-step guide to navigating and setting parameters within the function table.
How to enable and use the password function for authorized access.
Procedures for changing passwords for administrator and operator levels.
Steps for entering the password when powering on the balance with the function enabled.
Steps to check balance operation, environment, and weighing method for proper performance.
List of error codes, their meanings, and recommended actions for troubleshooting.
Contact information and advice for seeking professional service or repair.
