To Next PageTo Next Page
Need help?Do you have a question about the A&D GX-2002A and is the answer not in the manual?
Highlights the balance's self-check, impact detection, data memory, and connectivity features.
Essential precautions for optimal performance and accurate weighing, covering environment and placement.
Steps for performing a basic weighing, including selecting units, taring, and reading the value.
Guide to using the counting mode for determining object quantity based on unit mass.
Explains how to use percent mode for target weighing or checking sample variance against a reference.
Performing self-diagnosis and setting the minimum weighing value for accuracy warnings.
Balance automatically calibrates based on ambient temperature changes.
Calibrates the balance using its internal mass with a single touch.
Procedure for calibrating the balance using an external calibration weight.
Tests the weighing accuracy using an external weight and outputs the results.
Description of various function table items like Condition, Hold, Display, Comparator, and Data Output.
Steps to enable and use the statistical calculation mode for data analysis.
Enables and configures the flow rate measurement function, including setting flow rate units.
Enables and configures the password lock function for authorized user access.
Steps for entering the password when turning on the balance with the function enabled.
List and description of error codes displayed by the balance and their potential causes.
General
