What does excess characters error mean on A&D GX-2000?
An excess characters error on A&D Scales means the balance received excessive characters in a command. Confirm the command to resolve this issue.
How to fix stability error on A&D GX-2000?
A stability error on A&D Scales typically arises from environmental factors. To resolve this, prevent any vibration, drafts, temperature changes, static electricity, and magnetic fields around the scales. You can also adapt the balance to the environment.
What causes calibration weight error on A&D Scales?
A calibration weight error on A&D Scales occurs when the calibration weight is either too heavy or too light. Confirm the correct calibration weight value. Press the CAL key to return to the weighing mode.
Why am I getting a communications error on my A&D GX-2000?
A communications error on A&D Scales indicates a protocol error during communication. To fix this, confirm the correct format, baud rate, and parity settings.
What to do if A&D GX-2000 Scales show weighing pan error?
If your A&D Scales display a weighing pan error, ensure that the weighing pan is correctly installed. After confirming its installation, calibrate the balance.
What does timeout error mean on A&D Scales?
A timeout error on A&D Scales means the balance didn't receive the next character of a command within one second. Confirm the communication to resolve this.
What to do when A&D Scales memory is full?
If the memory of your A&D Scales is full, delete data in memory to store new data.
How to resolve undefined command error on A&D GX-2000?
To resolve an undefined command error on A&D Scales, confirm the command you are trying to execute.
What causes automatic response adjustment zero error on A&D Scales?
The automatic response adjustment zero error on A&D Scales indicates that there is something on the pan. Clear the pan and press the CAL key to return to the weighing mode.
How to fix clock battery error on A&D GX-2000 Scales?
If your A&D Scales display a clock battery error, it means the clock backup battery has been depleted. Press any key and set the time and date to resolve this.
Overview of the manual's structure and content.
Highlights key functionalities and capabilities of the GX series balance.
Details regulatory compliance with FCC and EMC directives.
Instructions for carefully unpacking the balance and its components.
Steps for correctly setting up the balance on a stable surface.
Guidelines for optimal setup and preparation before operating the balance.
Precautions and best practices to follow while using the balance for weighing.
Proper procedures for cleaning and maintaining the balance after operation.
Information on connecting and managing the balance's power supply.
Lists available weighing units and their conversion factors for the GX series.
Procedure for selecting and storing preferred weighing units in the function table.
Step-by-step guide for performing basic weighing operations in gram mode.
Instructions for using the counting mode to determine object quantities.
How to use the percent mode for target weighing or sample variability checks.
Explanation of the hold function for weighing moving objects like animals.
How the balance automatically adjusts response and performs self-checks.
Procedure for manually adjusting the balance's response characteristics.
Overview of calibration modes including internal, external, and test calibrations.
How the balance automatically calibrates with temperature changes.
Steps for calibrating the balance using its built-in internal mass.
Detailed guide for calibrating the balance with an external calibration weight.
Procedure for testing weighing accuracy using an external weight.
How to adjust the internal mass value for improved accuracy.
Setting protection switches to permit or inhibit parameter changes.
Steps to reset balance parameters to factory default settings.
Explanation of the two-layer structure (Class and Item) of the function table.
Describes the symbols and keys used within the function table interface.
Detailed explanation of various parameters available in the function table.
Explains settings for data output modes like key mode and stream mode.
Details different data output formats (A&D, DP, KF, MT, NU, CSV).
How data number, time, date, and ID number are added to weighing data.
Provides examples of various data output formats for stable and unstable conditions.
Instructions for setting and confirming the balance's internal clock and calendar.
Configuration and usage of the comparator function for quality checks.
Procedure to set a unique ID number for balance identification.
How to generate and output GLP reports using different data formats.
General information and warnings about using the data memory function.
How to store and manage weighing data in the balance's memory.
Storing calibration and test data in memory for later retrieval.
Managing unit mass data for the counting mode.
How to connect and configure the balance for printing with an AD-8121B printer.
Guidelines for connecting the balance to a PC via RS-232C interface.
How to use WinCT software for balance data communication and control.
Comprehensive list of commands for querying data and controlling the balance.
Explanation of acknowledge codes and error codes received during communication.
Practical examples demonstrating the usage of various balance commands.
Configuration settings for data output and serial interface.
Steps to diagnose issues by checking balance performance and environment.
List and explanation of various error codes displayed by the balance.
Guidance on when and how to contact a dealer for service or repair.
To Next Page
General
