81
Display Error code Description
EC, E06 Format error
A command includes incorrect data.
e.g. The data is numerically incorrect.
Confirm the command.
EC, E07 Parameter setting error
The received data exceeds the range that the balance
can accept.
Confirm the parameter range of the command.
Other errors If the errors described above can not be released or
other errors are displayed, contact the local A&D dealer.
Other symbol
When this indicator blinks, automatic self calibration is
required. The indicator blinks when the balance detects
changes in ambient temperature. If the balance is not
used for several minutes with this indicator blinking, the
balance performs automatic self calibration. The blinking
period depends on the operating environment.
20-3 Asking For Repair
If the balance needs service or repair, contact the local A&D dealer.
The balance is a precision instrument. Use much care when handling the balance and observe
the following when transporting the balance.
Use the original packing material.
Remove the weighing pan from the main unit.
To Next Page
Loading...
