Need help?Do you have a question about the A&D HM-202 and is the answer not in the manual?
Lists key features of the HM series balances, including dual range and GLP capabilities.
Lists optional accessories like serial interfaces, printers, and anti-theft devices.
Details FCC compliance for the equipment, addressing potential interference in commercial environments.
Explains the balance display indicators like stabilization and standby marks.
Explains the function of each key on the balance, such as ON:OFF, RE-ZERO, RANGE, MODE, and PRINT.
Lists available weighing units (e.g., grams, ounces, carats) and their conversion factors.
Step-by-step guide for performing a basic weighing operation with the balance.
Explains calibration status messages and how to cancel an ongoing calibration process.
Procedure for setting a digital tare value directly via the balance keyboard.
Steps to set and save an eight-character ID number for balance identification.
To Next Page
General
