Need help?Do you have a question about the A&D SK-1000WP and is the answer not in the manual?
General| Capacity | 1000 g |
|---|---|
| Readability | 0.1 g |
| Display | LCD |
| Waterproof | Yes |
| Calibration | External calibration |
| Interface | No |
| Power Supply | AC adapter or batteries |
| Weighing Units | oz |
| Operating Temperature | 40°C |
A potentially hazardous situation which, if not avoided, could result in death or serious injury.
A potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Manual updates, product spec changes, and general usage precautions for the scale.
Use only the specified AC adapter for the scale; other adapters may cause damage.
Avoid direct sunlight, mixing batteries, overloading, and chemical solvents for safe operation.
Details the scale's protection against water jets and dust as per IEC529.
Identifies external components including the weighing platform, keys, display, and leveling feet.
Details internal components such as the battery cover, compartment, and AC adapter socket.
Explains indicators like STABLE, NET, and ZERO for scale status and readings.
Instructions for installing six new batteries (R20P/LR20/D size) correctly observing polarity.
Guidance on connecting the optional AC adapter and verifying correct voltage requirements.
Instructions for leveling the scale on a firm surface using the spirit level for accurate weighing.
Information on automatic power-off function and common error messages (Overload, Out of range, Low battery).
Step-by-step guide for weighing, including using containers, zeroing, and selecting weighing units.
Explains when calibration is necessary, such as initial installation, relocation, or local regulations.
Identifies the ON/OFF, RE-ZERO, and UNITS keys used during calibration procedures.
Details calibration steps for zero and span using specific calibration weights for accuracy.
Procedure to calibrate the scale by compensating for local gravity acceleration values.
To Next Page
