A&D UA-651BLE User Manual (English)

Other manuals for A&D UA-651BLE

Questions and Answers:

A
Amanda MendozaJul 30, 2025
Why A&D Blood Pressure Monitor readings are too high or too low?
- D
  Derrick YorkJul 30, 2025
  Inaccurate readings on your A&D Blood Pressure Monitor can occur for several reasons: * The cuff may not be applied correctly, so ensure proper application. * Movement during measurement can interfere with accuracy, so remain still and quiet. * Incorrect cuff position can also lead to errors. Sit comfortably, place your arm on a table with your palm facing upward, and ensure the cuff is at heart level. * If you have a very weak or irregular heartbeat, the device may have difficulty in determining your blood pressure.
J
John FosterAug 3, 2025
Why is my A&D Blood Pressure Monitor cuff not inflating?
- E
  Elizabeth FlynnAug 4, 2025
  If the cuff on your A&D Blood Pressure Monitor isn't inflating, it's likely because the battery voltage is too low. If you see a blinking LOW BATTERY mark, or if the batteries are completely drained and no mark appears, replace all batteries with new ones.
B
Brandon WolfAug 8, 2025
Why is my A&D UA-651BLE value different from the doctor's office?
- J
  Jennifer StewartAug 8, 2025
  Differences between A&D Blood Pressure Monitor readings at home and those at a clinic can occur because apprehension at the doctor's office may elevate your reading. Home measurement reduces the effects of outside influences on blood pressure readings, supplementing the doctor's readings. You can also remove the batteries, place them back properly, and try the measurement again.
R
rachelhaynesAug 12, 2025
How to fix A&D Blood Pressure Monitor when nothing appears on the display?
- E
  Elizabeth ColeAug 12, 2025
  If nothing appears on the display of your A&D Blood Pressure Monitor, even when you turn it on, the batteries may be drained. Try replacing all the batteries with new ones. Also, ensure that the battery terminals are correctly aligned with the markings in the battery compartment. Reinstall the batteries, matching the negative and positive terminals to the indicated positions.
D
Dustin WhiteAug 16, 2025
What to do if A&D UA-651BLE Blood Pressure Monitor readings are too high or too low?
- E
  Edward WarnerAug 16, 2025
  If your A&D Blood Pressure Monitor readings are too high or too low, make sure the cuff is applied correctly. Also, remain very still and quiet during measurement. Sit comfortably, placing your arm on a table with your palm facing upward and the cuff at the same level as your heart. Note that if you have a very weak or irregular heartbeat, the device may have difficulty in determining your blood pressure.
S
Sarah BishopAug 20, 2025
What to do if nothing appears on my A&D UA-651BLE Blood Pressure Monitor display?
- M
  Matthew CookAug 20, 2025
  If your A&D Blood Pressure Monitor display is blank, even when powered on, the issue is likely due to: drained batteries, in which case you should replace all batteries with new ones; or incorrect battery placement. Make sure the negative and positive terminals are aligned correctly in the battery compartment.
L
Lisa WebbAug 25, 2025
What to do if A&D Blood Pressure Monitor cuff does not inflate?
- J
  Jean GillAug 26, 2025
  If the cuff on your A&D Blood Pressure Monitor isn't inflating, it's likely due to low battery voltage. You may notice blinking on the display, or no mark at all if the batteries are completely drained. The solution is to replace all batteries with new ones.