Why A&D UA-767 readings are too high?
If your A&D Blood Pressure Monitor readings are too high, it might be due to several reasons. Ensure the cuff is fastened correctly and positioned at the same level as your heart. Also, remain still and quiet during the measurement. If you have a very weak or irregular heartbeat, the device may have difficulty determining your blood pressure.
How to fix A&D UA-767 Blood Pressure Monitor when nothing appears on the display?
If nothing appears on the display of your A&D Blood Pressure Monitor, even when powered on, the batteries may be drained. Replace all batteries with new ones. Also, check that the battery terminals are correctly aligned, matching the positive and negative markings in the battery compartment.
Why won't the cuff inflate on my A&D Blood Pressure Monitor?
If the cuff on your A&D Blood Pressure Monitor won't inflate, it could be due to low battery voltage. If the LOW BATTERY mark appears, replace all batteries with new ones. Note that if the batteries are completely drained, the low battery mark may not be visible.
Why A&D UA-767 Blood Pressure Monitor readings are too high or too low?
Inaccurate readings on your A&D Blood Pressure Monitor can occur for several reasons: * The cuff may not be fastened correctly, so ensure it is properly secured. * Movement during measurement can affect accuracy; remain still and quiet. * Incorrect cuff position can also cause issues; sit comfortably, keep still, and raise your arm to heart level. * If you have a very weak or irregular heartbeat, the device may struggle to determine your blood pressure.
What to do if A&D Blood Pressure Monitor cuff does not inflate?
If the cuff on your A&D Blood Pressure Monitor isn't inflating, it's likely due to low battery voltage. If the low battery mark is blinking, or if the batteries are completely drained (and the mark doesn't appear at all), replace all the batteries with new ones.
General| Measurement Method | Oscillometric |
|---|---|
| Memory Capacity | 30 readings |
| Display | LCD |
| Automatic Power Off | Yes |
| Type | Upper Arm |
| Measurement Site | Upper Arm |
| Irregular Heartbeat Detection | Yes |
| WHO Blood Pressure Classification Indicator | Yes |
| Clinically Validated | Yes |
| Pressure Range | 0-299 mmHg |
| Cuff Size | 22-32 cm |
| Power Source | 4 x AA batteries |
| Pulse Rate Range | 40-180 beats/min |
Indicates ongoing measurement and pulse detection.
Signals low battery voltage for proper operation.
Appears when systolic/diastolic readings are within 10 mmHg.
Indicates unstable pressure due to movement during measurement.
Shows if pressure did not increase due to cuff/air connection issues.
Identifies display screens (Systolic, Diastolic, Pulse) and controls (Start, Pressure Switch).
Covers the arm cuff, tube, air connector, and air socket.
Refers to the battery compartment and adjustment screw.
Step-by-step guide for installing or replacing the monitor's batteries.
Chart matching arm sizes to recommended cuff sizes and model numbers.
Advice on relaxing, clothing, and arm positioning before measurement.
Instructions for sitting and correctly applying the cuff to the arm.
Guidance on adjusting the pressure switch based on expected systolic pressure.
Initiating inflation and observing the process.
What occurs when measurement is complete, including readings and auto-shutoff.
Instructions to note down blood pressure and pulse rate after measurement.
Emphasizes recording date and time for accurate blood pressure history.
Advice on resting between measurements if taking them again.
Steps to monitor cuff deflation speed on the display.
Procedure for adjusting the screw to modify the exhaust velocity rate.
Defines blood pressure, systolic/diastolic, and influencing factors.
Explains variations in blood pressure throughout the day and seasons.
Presents standards for classifying blood pressure categories.
Discusses hypertension and lifestyle suggestions for its control.
Explains advantages of home monitoring, avoiding "white coat hypertension".
Details the correct method for recording measurements.
Warnings on device handling, cleaning, temperature limits, and battery replacement.
Details model, type, display, range, and accuracy.
Specifies recommended operating and storage environments.
Provides contact details for US product information, care, and servicing.
Lists contact information for Canadian residents needing product support.
To Next Page
