What to do if A&D UA-787 cuff does not inflate?
If the cuff on your A&D Blood Pressure Monitor isn't inflating, it could be due to low battery voltage (indicated by a blinking LOW BATTERY mark). Replace all batteries with new ones. Note that if the batteries are completely drained, the low battery mark may not appear.
How to fix A&D UA-787 when nothing appears on the display?
If your A&D Blood Pressure Monitor display is blank, even when powered on, the batteries may be drained; replace them with new ones. Also, ensure the batteries are correctly installed, matching the positive and negative terminals to the markings in the battery compartment.
General| Measurement Method | Oscillometric |
|---|---|
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% of reading |
| Cuff Size | 22-32 cm |
| Memory | 60 readings |
| Display | LCD |
| Power Source | 4 x AA batteries |
| Type | Upper Arm |
| Measurement Range (Pressure) | 0-299 mmHg |
| Measurement Range (Pulse) | 40-200 bpm |
Guide on correctly attaching the cuff and preparing for accurate measurement.
Steps for performing the measurement and post-measurement actions.
Step-by-step guide for performing a standard blood pressure measurement.
Important advice for ensuring accurate and reliable blood pressure readings.
To Next Page
