Why A&D Blood Pressure Monitor readings are too high?
If your A&D Blood Pressure Monitor won't measure and the readings seem too high or low, make sure the cuff is correctly fastened and positioned at heart level. Stay still and quiet during measurements. Note that a very weak or irregular heartbeat can also affect the device's ability to determine your blood pressure.
What to do if A&D Blood Pressure Monitor display is blank?
If nothing appears on the display of your A&D Blood Pressure Monitor, even when it's turned on, the batteries may be drained. Try replacing all the batteries with new ones. Also, ensure that the battery terminals are correctly aligned, matching the positive and negative markings in the battery compartment.
General| Type | Upper Arm Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Display | LCD |
| Power Source | 4 x AA batteries |
| Cuff Size | 22-32 cm |
| Dimensions | Approx. 140 x 60 x 105 mm |
| Cuff Pressure Range | 0-299 mmHg |
| Measurement Range (Systolic) | 60-280 mmHg |
| Measurement Range (Diastolic) | 40-200 mmHg |
| Pulse Measurement Range | 40-180 beats/min |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% of reading |
| Pressure Range | 0-299 mmHg |
| Pulse Rate Range | 40-180 beats/min |
Guidelines on handling the device, cleaning, avoiding damage, and proper disposal of equipment.
Instructions on how to properly wrap the cuff around the upper arm for accurate measurement.
Recommendations for optimal positioning, relaxation, and timing for accurate blood pressure readings.
Important considerations for accurate readings, including stress, lifestyle, and device limitations.
Specifications of the blood pressure monitor, including measurement range, accuracy, and dimensions.
To Next Page
