A&D UA-767PC - User Manual

Questions and Answers

A
Ashley GuzmanJul 31, 2025
Why A&D UA-767PC Blood Pressure Monitor readings are too high or too low?
- D
  dsteeleJul 31, 2025
  Inaccurate readings on your A&D Blood Pressure Monitor may occur if the cuff isn't applied correctly, or if you moved your arm or body during the measurement. Ensure the cuff is correctly placed, and remain still and quiet during the measurement. The cuff should be at the same level as your heart while you are sitting comfortably. Also, if you have a very weak or irregular heartbeat, the device may have difficulty in determining your blood pressure.
V
Vickie BoydAug 8, 2025
Why A&D UA-767PC Blood Pressure Monitor readings are too high or low?
- E
  Earl RyanAug 8, 2025
  Inaccurate readings on your A&D Blood Pressure Monitor can stem from several factors: * The cuff may not be fastened correctly, so ensure it's properly secured. * Movement during measurement can interfere with accuracy; remain still and quiet. * Incorrect cuff positioning; sit comfortably, keep still, and raise your hand so that the cuff is at heart level. * A very weak or irregular heartbeat may cause difficulty in determining your blood pressure.
C
Christine DanielAug 16, 2025
What to do if nothing appears on my A&D UA-767PC display?
- H
  Hunter ColeAug 16, 2025
  If your A&D Blood Pressure Monitor display is blank, even when powered on: * The batteries may be drained. Replace all batteries with new ones. * The battery terminals may be incorrectly positioned. Reinstall the batteries, ensuring the negative and positive terminals match the markings in the battery compartment.
J
Jennifer ClarkAug 22, 2025
What to do if A&D UA-767PC cuff does not inflate?
- K
  Kyle FrazierAug 23, 2025
  If the cuff on your A&D Blood Pressure Monitor isn't inflating, it's likely due to low battery voltage. If the LOW BATTERY mark is blinking, or if the batteries are completely drained (no mark appears), replace all batteries with new ones.

Summary

Preliminary Remarks

Precautions

Important safety guidelines and warnings for using the blood pressure monitor.

Contraindications

Preparation for Measurements

Installing; Changing the Batteries

Procedure for inserting and replacing the device's batteries.

Connecting the Air Hose

Guide on how to properly connect the air hose to the device.

Connecting the AC Adapter

Selecting the Correct Cuff Size

Applying the Arm Cuff

How to Take Proper Measurements

Measurements

Device Operation Steps

Notes for Proper Measurements

Optimal Measurement Conditions

Interpreting Readings and Device Use

Troubleshooting

A&D UA-767PC Specifications

General

Measurement Method	Oscillometric
Display Type	LCD
Measurement Range (Diastolic)	30 - 200 mmHg
Accuracy (Pressure)	±3 mmHg
Cuff Size	22-32 cm
Connectivity	USB
Measurement Range (Pulse)	40 - 180 bpm
Accuracy (Pulse)	±5%
Memory	60 readings
Power Source	4 x AA batteries or AC adapter