To Next Page
T
tiffany05Jul 26, 2025
Why A&D Blood Pressure Monitor readings are too high or too low?
- AAlan MolinaJul 26, 2025
Inaccurate readings on your A&D Blood Pressure Monitor may occur if the cuff isn't applied correctly, if you move during the measurement, or if the cuff position is not correct. Ensure the cuff is applied correctly, remain still and quiet during measurement, and raise your hand so that the cuff is at heart level. Also, if you have a very weak or irregular heartbeat, the device may have difficulty in determining your blood pressure.
General
