How to fix A&D UA-767 Plus Blood Pressure Monitor when nothing appears on the display?
If nothing appears on the display of your A&D Blood Pressure Monitor, even when it's turned on, the batteries might be drained. Replace all batteries with new ones. Also, ensure the battery terminals are correctly positioned, matching the positive and negative markings in the battery compartment.
Why does the cuff not inflate on my A&D UA-767 Plus Blood Pressure Monitor?
If your A&D Blood Pressure Monitor cuff isn't inflating, it could be due to low battery voltage. If the 'LOW BATTERY' mark is blinking, or if the batteries are completely drained and no mark appears, replace all batteries with new ones.
What to do if A&D Blood Pressure Monitor readings are too high or low?
If your A&D Blood Pressure Monitor readings are too high or too low, make sure the cuff is applied correctly. Also, remain very still and quiet during the measurement. Ensure you sit comfortably with your hand raised so the cuff is at the same level as your heart. If you have a very weak or irregular heartbeat, the device may have difficulty determining your blood pressure.
General| Measurement Method | Oscillometric |
|---|---|
| Cuff Size | 22-32 cm |
| Memory Capacity | 60 readings |
| Display | LCD |
| Device Type | Upper Arm Blood Pressure Monitor |
| Irregular Heartbeat Detection | Yes |
| WHO Blood Pressure Classification Indicator | Yes |
| Pressure Range | 0-299 mmHg |
| Power Source | 4 x AA batteries |
| Pulse Rate Range | 40-180 beats/min |
Specific warnings and contraindications for the safe and effective use of the blood pressure monitor.
Step-by-step guide for inserting and replacing the batteries in the blood pressure monitor.
Step-by-step guide for performing a standard blood pressure measurement with the device.
To Next Page
