Alarm
Aastra 632d 121
eud-1586/1.0 – R3.0 – 04.2013
Setting the alarm signalling
You want to adapt the way in which your phone signals pre-alarms and alarms.
When the phone triggers an alarm, a pre-alarm sounds locally on the phone, after that
the phone sends an alarm message to the alarm system. The alarm is then subse-
quently processed by the alarm system. The alarm system can be set up so that the
alarms are also signalled on the phone.
You can add the vibracall to the pre-alarm melody.
Setting the pre-alarm signalling
The phone provides a selection of pre-alarm melodies.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
Sensor alarm
Scroll to Sensor alarm and press the Select softkey.
Alarm melody
Selecting the pre-alarm melody:
1. Scroll to Alarm melody and press the Select softkey.
2. Scroll to the setting you want and confirm your choice of setting with the
Select softkey.
➔The setting is stored.
Note:
To listen to all the melodies use the Test softkey.
Vibracall
Selecting the vibracall:
Scroll to Vibracall and press the Select softkey.
➔The setting is stored.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
