10
Model 470 User Guide
Customizing your phone
handle incoming and outgoing
calls. This option provides different
combinations of these three
methods to provide maximum
flexibility in handling calls. No
matter which option is chosen, the
handset can always be used to
answer and place calls. There are
four options to choose from:
• Handsfree – this is the default
setting. Calls can be made or
received using the handset or
handsfree speakerphone and can
be switched between the two
modes.
• Headset – choose this setting if
you want to make or receive all
calls using a headset. The speak-
erphone is disabled in this mode
and the speakerphone button is
used to answer or place calls
while using the headset.
• Spkr/Hset – calls will be sent to
the handsfree speakerphone. By
pressing the d
/f button on the
phone you can switch between
the handsfree speakerphone and
a headset. The speakerphone sta-
tus light changes to let you know
when the speakerphone or head-
set is active. A steady light
always indicates the speaker-
phone is active while a blinking
light indicates the headset is
active.
• HSet/Spkr – calls will be sent to
the headset. By pressing the d
/
f button on the phone you can
switch between the headset and
the handsfree speakerphone. The
speakerphone status light
changes to let you know when
the speakerphone or headset is
active. A steady light always
indicates the speakerphone is
active while a blinking light indi-
cates the headset is active.
†
These services may have different names in
your area, and may require paid subscription.
Contact your telephone company for details.
470 E.book Page 10 Tuesday, October 12, 2004 10:43 AM
To Next Page
Loading...
