Page 26 01/2007 AMT/PTD/PBX/0062/1/2EN
6. Press the or key to select base 1 2 3 4 5 6 7 8.
Normally, 1 blinks and you just have to press the OK key.
7. "Enter code" appears on the display
Press OK.
The set displays successively:
• "Please wait"
• "Still waiting"
• "Declare base OK" or "Failed, Retry"
If the registration fails, reset the handset before restarting the operation. Note :
Stop and restart the mobile, then check to see if it is active.
3.11.2.2 DEREGISTERING AN M90X MOBILE TERMINAL
Press the Menu key 1.
2.
3.
4.
5.
Press the middle key. “Personalize” is displayed
Press the Personalize key
Press the middle or key several times until "Declare base" is displayed
Press the Declare base key
The handset display shows:
Declare
Base number?
1 2 3 4 5 6 7 8 OK
6. Press the or key to select the base to be deleted and confirm by pressing the OK key
The handset display shows:
Delete base
n
no yes
• (n = base number)
• Press the key: Yes
The handset display shows:
Enter code
n
OK
7. Stop and restart the mobile by pressing the "C" key for a few seconds but not long enough
for the display to change.
To Next Page
Loading...