Page 83 01/2007 AMT/PTD/PBX/0062/1/2EN
6.2.3 TELNET USER SHELL
Each RFP (OMM included) offers a lot of commands within the telnet shell. Most of them are
used for diagnosis and may help experts to resolve failures.
Please note that some commands can harm the system’s operation.
6.2.3.1 LOGIN
The procedure is as follows:
♦
♦
Open a telnet session with the RFP.
Enter the login ‘iprfp’ and the password ‘omm12’.
Welcome to IP RFP OpenMobility Matra Version x.y.z
Fr Apr 29 12:34:06 CEST 2005
Release
(BUILD 0)
172.30.111.232 login: iprfp
Password:
Welcome to the system usershell!
172.030.111.232 > help
6.2.3.2 OVERVIEW OF THE COMMANDS
Type ‘help’ to get an overview of the commands:
arp - show arp table
console_off - disable console on local terminal
console_on - enable console on local terminal
dmesg - print the kernel ring buffer
flash - show flash info
flash_update - update the booter
interface show interface configuration
ip_rfpconsole - console to the rfp application
link - show link state
logread - show message log
mem show memory usage
ommconsole - console to the omm application
ps - show process table
ping - Ping <ipaddress>
reboot - restart the system
route - show routing table
uptime - show system uptime
exit exit shell
To Next Page
Loading...