Page 84 01/2007 AMT/PTD/PBX/0062/1/2EN
6.2.3.3 RFP CONSOLE COMMANDS
If you type ‘ip_rfpconsole’ you can use the following commands on each RFP:
IP RFP console commands:
heap - shows heap buffer statistics
help - Displays Command Help Table
lec - adjust linear echo canceler parameters
media - display state of media channels
mutex - lists all created MXP mutexes
queues - lists all created MXP queues
reset - resets the IPRFP application
rsx - allows RSX connection to BMC via TCP
sem - lists all created MXP semaphores
spy - set/display spy levels: [ <key #> <level #> ]
tasks - lists all running MXP tasks
voice - displays the state of voice handling
exit - exits the RFP console
Please note that the ‘spy’ command enables you to increase the level of syslog messages. They
must be used with precaution by qualified personnel, because the SPY command may hamper
the system’s operation.
6.2.3.4 OMM CONSOLE COMMANDS
If you type ‘ommconsole’ and you have opened the session on the OMM RFP, you can use the
following OMM related commands:
Please note the ‘spy’ command, which enables you to increase the level of syslog messages,
especially for OMM subsystems. They must be used with precaution by qualified personnel,
because the SPY command may hamper the system’s operation.
To Next Page
Loading...