Page 29 01/2007 AMT/PTD/PBX/0062/1/2EN
9. Select the device to which this terminal must be attached.
10.
Note :
Press Esc to leave this mode.
After registering the mobile terminal, to change the PBX name and/or the Int No., use
the selection "Menu, Device, OK, Save, OK, Opt, Edit; enter PBX name, OK; enter Int
No., OK”.
3.12.2.2 CANCELING A REGISTRATION
When the mobile terminal is registered on several RFPs, to cancel the registration on a non-
selected RFP, proceed as follows:
1. Press the Menu key, select System using the keys and confirm with OK.
2.
Select Register and confirm with OK.
3.
4.
Select the base station to be deleted using the keys.
Press the Opt key, select Delete using the keys and confirm with OK.
To Next Page
Loading...