Page 71 01/2007 AMT/PTD/PBX/0062/1/2EN
Example for the F6/F5 range
The SIP-DECT-subscriber-specific data is extracted from the OMM backup file and inserted into
an Excel file, which can be used by the SETUP WIZARD.
SIP type
declaration
Informationfrom
the OMM
The SIP type subscriber must be added to this file, since this information is not specified in the
file from the OMM.
The rest of the file must be completed by the operator based on:
•
•
The Excel file format used
The additional information about and/or required to run the site.
See the F5/F6 range operating manuals and the SETUP WIZARD documentation.
To Next Page
Loading...