25
ON, in the channel list will play automatically when you highlight the channel. If you
set OFF, in the channel list when you highlight the channel, you should press the OK
button to play it.
10. Auto Exit CH List: If you set ON, the channel list will disappear when you press
OK on a Highlighted channel. If you set OFF, the channel list will disappear when
you press OK on a playing channel.
11. Recall List: You can turn Recall List on or off. If you set ON, when you press
Recall button of RCU you can get the recall list. If you set OFF, when you press
recall button you can go back to the last program you have selected.
12. Low Power Standby：You can turn Low Power Standby on or off.
13. Standby Time: You can set the Standby Time on or off.
14. Front Panel Light: Set the brightness of the LED.
15. Front Panel Display: Set the LED display channel or clock.
16. Enable X-TimeShift
17. Ch. List Typ
6.2 OSD Setup
Menu->SETTINGS->OSD Setup
1. Menu Transparency: Set the
transparency of all menus.
2. TXT Transparency: Set the
transparency of teletext.
3. Display Mode: Set the HD format
between 1080p, 1080i, 720p, 576i or
576p.
4. TV Type: Set the TV Type on
PAL/NTSC/Auto state.
5. Screen Mode: Set the display format according to the screen ratio. Select TV
screen mode either 4:3 or 16:9 according to the TV type, or press the MODE button
of RCU directly.
To Next Page
Loading...
