The rubber seals of the top
must be washed with water
only. Apply talcum power or
use specific rubber care products (sil-
icone spray) if the seals are dry or
partially stuck.
Rinse immediately to remove
soap to prevent stains and
blots. Repeat the operation
if needed.
Waterproofing the top
Use specific waterproofing products for
fabric tops.
Follow the instructions on
the waterproofing product
container for optimum
results.
Remove as much dirt from the surface of
the soft top with a soft brush or vacuum
cleaning before washing it. This opera-
tion will considerably improve the final
result.
In absence of specific products, use water
and mild soap applied with a sponge
preferably in the shade for washing.
Rinse the soft top with clean water after
having eliminated all the stains.
Hand washing is recommended; modern
automatic washing systems equipped
with soft brushes which do not apply
excessive pressure and employ specific
soft top products may be used.
Interior top fabric
Remove dust with a soft brush. Avoid
using hard brushes made of synthetic
material to prevent damaging the fabric
beyond repair.
Clean the surface with a microfibre cloth
or soft sponge dipped in a solution of
water and mild soap. Clean the entire
surface, including the zones where clean-
ing is not needed, to prevent stains.
Use common, car care mild stain re-
movers for more stubborn stains. Apply
by blotting (never rubbing) directly on the
area of the stain.
Leave the car in the shade after washing
avoiding direct sunlight.
10
603_97_890 ABARTH 500C GB 1ed 31-05-2010 10:54 Pagina 10
To Next Page
Loading...
Need help?
General
