GEAR NOT AVAILABLE
This message appears in the display to-
gether with a buzzer in the following cases:
❒
when it is not possible to change gear
due to a fault in the system;
or
❒
when, due to a fault in the system, it is
only possible to engage 1
st
, 2
nd
, 3
rd
or
reverse (R).
Contact an Abarth Dealer-
ship if the message remains in
the display.
OPERATION NOT PERMITTED
The message appears in the display to-
gether with a buzzer when the system will
not accept a gear change via the control
lever because certain conditions required
for acceptance of the gear change are not
met.
PUSH BRAKE PEDAL –
REPEAT OPERATION
The message appears in the display ac-
companied, in some cases, by a buzzer for
safety reasons if you attempt to change
gear without previously pressing the brake
pedal.
SET TO NEUTRAL N (neutral)
This message appears in the display to-
gether with a warning buzzer when the
system asks the driver to perform the ma-
noeuvre.
When the transmission is changed to (N)
the message in the display should go off.
Contact an Abarth Dealer-
ship if the message remains in
the display.
Contact an Abarth Dealer-
ship if the message remains in
the display.
21
603_97_890 ABARTH 500C GB 1ed 31-05-2010 10:54 Pagina 21
To Next Page
Loading...
