Abatron BDI2000 - Initial configuration of the bdiGDB system

bdiAccess JTAG interface library, BDI2000 (MIPS32) Installation Manual 12
© Copyright 1992-2004 by ABATRON AG V 1.00
2.5 Installation of the Configuration Software
On the enclosed diskette you will find the bdiAccess library, the BDI configuration software and the
firmware required for the BDI. Copy the appropriate files to a directory on your hard disk.
Windows and Linux/Unix hosts:
manual.pdf This installation manual in pdf format
bdiacc.pdf The bdiAccess interface specification in pdf format
b20r4kfw.xxx Firmware for BDI2000 for MIPS32 targets
r4kjed20.xxx JEDEC file for the BDI2000 (Rev. A/B) logic device programming
r4kjed21.xxx JEDEC file for the BDI2000 (Rev. C) logic device programming
Only for Windows hosts:
accr4k.exe Setup and demo program (WIN32 application)
accr4k.hlp Helpfile for the setup and demoprogram
bdiifc32.dll The bdiAccess library (WIN32-DLL)
bdiifc32.lib The import library for the bdiAccess DLL (WIN32)
bdiifc.h The C header file showing the interface to the bdiAccess DLL
access.txt Information file used by the demo program
access.ini Initialisation file for the demo program
Only for Linux/Unix hosts:
bdiaccux.zip Archive with the bdiAccess sources for Linux/Unix hosts
bdisetup.zip Archive with the BDI setup utility sources for Linux/Unix hosts