V9000T Trinocular Microscope
4
INTRODUCTION
Congratulations on the purchase of your new ACCU-SCOPE
®
microscope. ACCU-SCOPE
®
microscopes are engineered and manufactured to the highest quality standards. Your microscope will
last a lifetime if used and maintained properly. ACCU-SCOPE
®
microscopes are carefully assembled,
inspected and tested by our staff of trained technicians in our New York facility. Careful quality control
procedures ensure each microscope is of the highest quality prior to shipment.
UNPACKING AND COMPONENTS
Do not discard the container: Your microscope arrived packed in a molded Styrofoam container. the
Styrofoam container should be retained for reshipment of your microscope if needed. Avoid placing the
microscope in dusty surroundings or in high temperature or humid areas as mold and mildew will form.
Carefully remove the microscope from the Styrofoam container by its arm and base and place the
microscope on a flat, vibration-free surface.
COMPONENTS DIAGRAM
To Next Page
Loading...