ABB 2155 - Specification; General; Handling and Storage Conditions for Columns and Resin

Cation Exchange Column
2155 5 SPECIFICATION
IM/2155 Rev. G 5
5 SPECIFICATION
5.1 General
5.2 Handling and Storage Conditions for Columns
and Resin
Store between 5 ° and 50 °C (41 ° and 122 °F).
Avoid freezing.
Avoid de-hydration.
When handling the resin use of gloves and safety glasses is
recommended.
Fig. 4.1 Partially Depleted Column
Depleted
Resin
Maximum Flow rate: 400 ml min
-1
Minimum Flow Rate: 30 ml min
-1
Recommended Flow Rate: 100 to 300 ml min
-1
Max Temperature: 50 °C
Max Pressure: 3 kgcm
-1
/3bar/45psi
Ion Exchange ADH Resin: Colour changes when
exhausted from orange to
dark red
Connection to Inlet: 6 mm (
1
/4 in.) ID
Connection to Outlet: 6 mm (
1
/4 in.) ID
Caution. Spilled resin beads can cause a slip hazard.