Function name Signal type Signal name Description
AUTOBITS.1.CMDBIT8 Command out bit 8
AUTOBITS.1.CMDBIT9 Command out bit 9
AUTOBITS.1.CMDBIT10 Command out bit 10
AUTOBITS.1.CMDBIT11 Command out bit 11
AUTOBITS.1.CMDBIT12 Command out bit 12
AUTOBITS.1.CMDBIT13 Command out bit 13
AUTOBITS.1.CMDBIT14 Command out bit 14
AUTOBITS.1.CMDBIT15 Command out bit 15
AUTOBITS.1.CMDBIT16 Command out bit 16
AUTOBITS.1.CMDBIT17 Command out bit 17
AUTOBITS.1.CMDBIT18 Command out bit 18
AUTOBITS.1.CMDBIT19 Command out bit 19
AUTOBITS.1.CMDBIT20 Command out bit 20
AUTOBITS.1.CMDBIT21 Command out bit 21
AUTOBITS.1.CMDBIT22 Command out bit 22
AUTOBITS.1.CMDBIT23 Command out bit 23
AUTOBITS.1.CMDBIT24 Command out bit 24
AUTOBITS.1.CMDBIT25 Command out bit 25
AUTOBITS.1.CMDBIT26 Command out bit 26
AUTOBITS.1.CMDBIT27 Command out bit 27
AUTOBITS.1.CMDBIT28 Command out bit 28
AUTOBITS.1.CMDBIT29 Command out bit 29
AUTOBITS.1.CMDBIT30 Command out bit 30
AUTOBITS.1.CMDBIT31 Command out bit 31
AUTOBITS.1.CMDBIT32 Command out bit 32
Bool to Int (B16I) Analog inputs B16I.1.OUT Output value
Breaker failure (CCBRBRF) Binary inputs CCBRBRF.1.CB_FAULT_AL Delayed CB failure alarm
CCBRBRF.1.TRBU Back-up trip by breaker failure
protection function
CCBRBRF.1.TRRET Retrip by breaker failure
protection function
Current circuit supervision
(CCRDIF)
Binary inputs CCRDIF.1.FAIL Detection of current circuit
failure
Three-phase current
measurements (CMMXU)
Analog inputs CMMXU.1.I_DB_A Phase A amplitude, magnitude
of reported value
CMMXU.1.I_DB_B Phase B amplitude, magnitude
of reported value
CMMXU.1.I_DB_C Phase C amplitude, magnitude
of reported value
CMMXU.1.I_ANGL_A Phase A angle, instantaneous
value
CMMXU.1.I_ANGL_B Phase B angle, instantaneous
value
Table continues on next page
Section 2 1MRS756791 A
DNP3 data mappings
12 630 series
Point List Manual
To Next Page
Loading...
