ABB A150-M Series - Removing the Gas Outlet Casing; Fig. 48: Remove Gas Outlet Casing Without Support

To Next Page

To Previous Page

Operation Manual / A150-M56/66/57/67 - A155-M..

10 Dismantling and fitting with removed air inlet and gas outlet / 10.2

Removing the gas outlet casing

10.2 Removing the gas outlet casing

u Mark the casing position for assembly.

Variant without support

Fig.48: Remove gas outlet casing without support

1. If present: Remove waste gate pipe.

2. Remove insulation ring.

3. Fit swivel lifting eyes (S) to the gas outlet casing (61001). Attach lifting gear to swivel lift-

ing eye and secure to a crane hook.

4. Loosen and remove nuts (51009).

5. Remove the gas outlet casing (61001), set it down properly in an appropriate place and

secure it.

6. Remove and dispose of the gasket(61002).

Page 97 / 194

Other manuals for ABB A150-M Series