Need help?Do you have a question about the ABB ACH 500 Series and is the answer not in the manual?
General| Output Voltage | 0 to Input Voltage |
|---|---|
| Frequency | 50/60 Hz |
| Type | Variable Frequency Drive (VFD) |
| Communication Protocols | Modbus, Profibus |
| IP Class | IP21, IP55 |
| Typical Applications | Pumps, fans |
| Protection | Overcurrent, overvoltage, undervoltage, short circuit |
| Operating Temperature | -10°C to +40°C (without derating) |
| Storage Temperature | -40°C to +70°C |
Explains warning types (voltage, general) and cautions.
Introduces pre-programmed parameter sets for quick ACH 500 start-up.
Organizes ACH 500 parameters into four levels: Operating Data, Main, Group, Parameter.
Lists and explains parameters for drive and motor setup.
Lists Start-up Data parameters with descriptions and ranges.
Describes how to monitor and select data parameters for drive activity.
Explains control options from the keypad or external devices.
Details the operation diagram and I/O signals for the HVAC application.
Describes operation diagram and I/O for maintaining static pressure.
Details operation diagram and I/O for closed-loop control systems.
Describes operation diagram and I/O for pumping and ventilation systems.
Explains parameter functions and how to access menus.
Details the organization of parameters into Mains and Groups.
Introduces parameters for motor and drive protection.
Details fault functions for motor stall, overload, and underload.
Introduces parameters specific to application macros.
Details PI-Controller parameters for HVAC-PI macro.
Details PI-Controller parameters for Pump & Fan macro.
To Next Page
