ABB ACS580-01 Series - Page 2

2
ACS580-01…, ACH580-01… and ACQ580-01…+C135 frames R1 to R3 flange mounting kit quick installation guide
k
For dimensions, see the mounting template delivered with the flange
mounting kit or ACS580-01…, ACH580-01… and ACQ580-01…+C135 drives
with flange mounting kit supplement (3AXD50000349821 [English]).
Go to www.abb.com/drives
ACS580-01 manuals ACH580-01 manuals ACQ580-01 manuals
Back
14
Drill holes for M6 Rivet or Kalei nuts. Consider the hole size for the nuts.
Rivet/Kalei nuts are not included in the delivery.
Note: Mounting templates are different (size, number and position of
holes) for different frame sizes.
9
13
Optional steps
Note: Frame R3 is shown as an example.
The cable shelf varies in different frame sizes.
Note: Reinstall the screws to avoid moisture
exchange through the empty holes!
1.5 N·m
1 × M6×25 screw
6 N·m
1 × M6×25 screw
6 N·m
R1: 8 × M6×25 screw
R2: 10 × M6×25 screw
R3: 12 × M6×25 screw
6 N·m
15
i
Note: UL Type 12
is fulfilled on the
drive backside
when the flange
and hood are
installed.
Step10 is not
required for IP55.
h
8
j
j
2 × M4 nut
1.5 N·m
10
Frames R1...R2:
2 x M6 nuts
Frames R3:
3 x M6 nuts
6 N·m
FrontBack Back Front
12
11
Frame R3:
2 × M4 nut 1.5 N·m
Frames R1...R2:
2 × M4 nut 1.5 N·m
2 × M4 × 8 Combi screw 1.5 N·m
3AXD50000119172 Rev E (EN) 2019-03-29