Need help?Do you have a question about the ABB ACS580-07 and is the answer not in the manual?
General| Output Voltage | 0 to Input Voltage |
|---|---|
| Cooling Method | Air-cooled |
| Input Voltage | 380 to 480 V |
| Control Method | Vector Control, Scalar Control |
| Enclosure Type | IP21 |
| Communication Options | Modbus, Profibus, Ethernet |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
Explains warning symbols and notes used in the manual to convey hazards and information.
Lists essential electrical safety measures for personnel working on drives.
Explains the step-by-step process of the emergency stop function.
Details how the system reacts to detected failures in the safety circuit.
Covers factory wiring and user connection guidelines for the safety option.
Describes the procedure for activating the emergency stop.
Provides steps to reset the emergency stop circuit and resume operation.
Emphasizes the need for validation tests to ensure correct operation.
Outlines the steps and conditions for performing validation tests.
Explains the indications of the emergency stop safety relay for diagnostics.
Defines recommended intervals for periodic proof testing of safety functions.
Presents safety data values based on default design and assumptions.
To Next Page
