Exclusion of liability
ABB is not responsible for the implementation, verification and validation of the overall
safety system. It is the responsibility of the system integrator (or other party) who is
responsible for the overall system and system safety.
The system integrator (or other responsible party) must make sure that the entire
implementation complies with the instructions in this manual, all relevant standards,
directives and local electrical code, and that the system is tested, verified and validated
correctly.
Quick reference guide for taking a safety function into
use
Task
Connect the user-defined wiring (if any). Refer to the wiring instructions in this manual and the
circuit diagrams delivered with the drive.
Check and/or set the safety function related parameters (as listed in this manual).
Do the validation test to make sure that the implemented system meets the safety requirements.
You can find the instructions for the validation test in this manual.
Document the validation test procedure. You can find the guidelines for the validation test report
in this manual.
Related manuals
CodeName
Drive hardware manuals
3AXD50000045815ACS580-07 drives hardware manual
3AXD50000045816ACH580-07 drives hardware manual
3AXD50000045817ACQ580-07 drives hardware manual
Drive firmware manuals
3AXD50000016097ACS580 standard control program firmware manual
3AXD50000027537ACH580 HVAC control program firmware manual
3AXD50000035867ACQ580 pump control program firmware manual
PC tool manuals
3AUA0000094606Start-up and maintenance PC tool Drive composer user’s manual
TT201312111015Functional safety design tool user’s manual
Safety
3AUA0000048753Functional safety, Technical guide No. 10
Option manuals
3AXD50000171835Emergency stop, stop category 0 (option +Q963) for ACS580-07, ACH580-07 and
ACQ580-07 drives user's manual
3AUA0000085685ACS-AP-I, -S, -W and ACH-AP-H, -W Assistant control panels user’s manual
3AXD50000032527ACS-BP-S basic control panels user’s manual
See www.abb.com/drives/documents for all manuals on the Internet. For additional
ABB safety information and solutions, visit www.abb.com/safety.
12 Introduction to the manual
To Next Page
Loading...
