ABB ACS580-07 - Parameter settings; Contents of this chapter; Drive parameter settings

Parameter settings
Contents of this chapter
This chapter gives the parameter settings related to the safety function.
Drive parameter settings
The table that follows gives the parameters related to the safety function. The
parameters are set at the factory.
Description
Default value
1)
NameNo.
Selects which indications are given when the Safe torque
off (STO) function is activated. Warning/Warning is the
recommended setting.
Warning/WarningSTO indication
run/stop
31.22
1)
Value set by ABB at the factory for the default design.
5
Parameter settings 21