What to do if a fault message is displayed on my ABB Control Panel?
If a fault message appears on your ABB Control Panel, first identify and eliminate the cause of the fault. The fault codes are listed in the drive firmware manual. You can also try pressing the Reset button in the Fault view.
What to do if a warning message is displayed on my ABB Control Panel?
If a warning message is displayed on your ABB Control Panel, you should identify and eliminate the cause. To view the warning messages, open the Main menu and select Diagnostics. The warning codes are listed in the drive firmware manual.
General| Enclosure Rating | IP21, IP55 |
|---|---|
| Power Range | 0.75 kW to 500 kW |
| Control Method | Vector Control, Scalar Control |
| Communication Protocols | Modbus RTU, Ethernet/IP, Profibus DP, CANopen |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Cooling Method | Air Cooling |
This manual is applicable with the ACS-BP-S basic control panel, the panel software version GPBPS v1.2 and later software versions.
See the appropriate drive hardware manual.
See the appropriate drive manuals. All manuals are available in pdf format at www.abb.com/drives/documents.
To start up the drive, you need to set the motor data, motor control, connection macro and drive parameters.
Describes the functions of the control panel buttons and display elements for operation.
Accesses settings for reference speed, rotation direction, faults, and warnings.
Instructions on how to start and stop the drive using the basic control panel buttons.
Procedure to modify the motor rotation direction using the control panel.
How to access diagnostics to view warnings or faults on the control panel.
Details on the structure and content of submenus for Motor Data and Motor Control.
Explanation of fault and warning messages displayed on the control panel.
Describes issues related to communication failure between the drive and panel.
Interpreting the status light indicators for drive operational states.
Details on the components of the control panel, including connector and display specifications.
Physical specifications including weight, length, width, and thickness of the control panel.
IP ratings for the control panel when attached to a drive or mounted separately.
Illustrates the physical dimensions of the control panel.
Information on the materials used for the enclosure, packaging, and screen of the control panel.
Specifies operating, storage, and transportation environmental conditions for the control panel.
Contains generic and cyber security disclaimers related to product use and data.
Guidance on how to address inquiries about the product to ABB representatives.
Information on accessing ABB product training resources online.
Instructions for submitting comments and feedback on the ABB Drives manuals.
Information on finding manuals and product documents in PDF format online.
To Next Page
