Troubleshooting
Fault and warning messages
For information on fault and warning messages, see the relevant drive firmware
manual.
A fault message The display shows a fault message code if a problem
has been detected. A fault message needs your
immediate attention.
When a fault message code is displayed:
1. Identify and eliminate the cause. The fault codes
are listed in the drive firmware manual.
2. Press Reset in the Fault view.
Warning messages The display shows a warning message code if a
problem has been detected. Identify and eliminate the
cause.
To view the warning messages list:
1. Open the Main menu.
2. Select Diagnostics and open the warning messages
list. The warning codes are listed in the drive
firmware manual.
To Next Page
Loading...
