What to do if a fault message is displayed on my ABB Control Panel?
If a fault message appears on your ABB Control Panel, first identify and eliminate the cause of the fault. The fault codes are listed in the drive firmware manual. You can also try pressing the Reset button in the Fault view.
What to do if a warning message is displayed on my ABB Control Panel?
If a warning message is displayed on your ABB Control Panel, you should identify and eliminate the cause. To view the warning messages, open the Main menu and select Diagnostics. The warning codes are listed in the drive firmware manual.
General| Enclosure Rating | IP21, IP55 |
|---|---|
| Power Range | 0.75 kW to 500 kW |
| Control Method | Vector Control, Scalar Control |
| Communication Protocols | Modbus RTU, Ethernet/IP, Profibus DP, CANopen |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Cooling Method | Air Cooling |
To Next Page
