Introduction to the manual 9
• Fault tracing (page 377) lists the warning and fault messages with possible
causes and remedies.
• Control chain diagrams (page 441) describes the parameter structure within the
drive.
• Further information (inside of the back cover, page 457) describes how to make
product and service inquiries, get information on product training, provide
feedback on ABB Drives manuals and find documents on the Internet.
Related documents
See List of related manuals on page 2 (inside of the front cover).
Categorization by frame (size)
The ACS580 is manufactured in several frames (frame sizes), which are denoted as
RN, where N is an integer. Some information which only concern certain frames are
marked with the symbol of the frame (RN).
The frame is marked on the type designation label attached to the drive, see chapter
Operation principle and hardware description, section Type designation label in the
Hardware manual of the drive.
ACS580 FW.book Page 9 Wednesday, September 21, 2016 9:48 PM
To Next Page
Loading...
