ABB ACS580 - System

326 Parameters
95.20 HW options word 1 Specifies hardware-related options that require differentiated
parameter defaults.
This parameter is not affected by a parameter restore.
-
0000h…FFFFh Hardware options configuration word. 1 = 1
96
96 System
Language selection; access levels; macro selection;
parameter save and restore; control unit reboot; user
parameter sets; unit selection.
96.01 Language Selects the language of the parameter interface and other
displayed information when viewed on the control panel.
Notes:
• Not all languages listed below are necessarily supported.
• This parameter does not affect the languages visible in the
Drive composer PC tool. (Those are specified under View
– Settings – Drive default language.)
-
Not selected None. 0
English English. 1033
Deutsch German. 1031
Italiano Italian. 1040
Español Spanish. 3082
Portugues Portuguese. 2070
Nederlands Dutch. 1043
Français French. 1036
Dansk Danish. 1030
Suomi Finnish. 1035
Svenska Swedish. 1053
Russki Russian. 1049
Polski Polish. 1045
Türkçe Turkish. 1055
Chinese (Simplified,
PRC)
Simplified Chinese. 2052
No. Name/Value Description Def/FbEq16
Bit Name Value
0 Supply frequency
60 Hz
If you change the value of this bit, you have to do a complete reset to
the drive after the change. After reset you have to reselect the macro
to be used.
See section Differences in the default values between 50 Hz and
60 Hz supply frequency settings on page 343.0 = 50 Hz.
1 = 60 Hz.
1…11 Reserved
12 du/dt filter
activation
When active, an external du/dt filter is connected to the drive/inverter
output. The setting will limit the output switching frequency, and
force the fan of the drive/inverter module to full speed.
0 = du/dt filter inactive.
1 = du/dt filter active.
13…15 Reserved
ACS580 FW.book Page 326 Wednesday, September 21, 2016 9:48 PM