ABB ACS580 - System Info

158 Parameters
06.32 MSW bit 13
selection
Selects a binary source whose status is transmitted as bit 13
(User bit 2) of 06.11 Main status word.
False
False 0. 0
True 1. 1
Other [bit] Source selection (see Terms and abbreviations on page 144). -
06.33 MSW bit 14
selection
Selects a binary source whose status is transmitted as bit 14
(User bit 3) of 06.11 Main status word.
False
False 0. 0
True 1. 1
Other [bit] Source selection (see Terms and abbreviations on page 144). -
07
07 System info
Drive hardware and firmware information.
All parameters in this group are read-only.
07.03 Drive rating id Type of the drive. (Rating ID in brackets.) -
07.04 Firmware name Firmware identification. -
07.05 Firmware version Version number of the firmware. -
07.06 Loading package
name
Name of the firmware loading package. -
07.07 Loading package
version
Version number of the firmware loading package. -
07.11 Cpu usage Microprocessor load in percent. -
0…100% Microprocessor load. 1 = 1%
07.25 Customization
package name
First five ASCII letters of the name given to the customization
package. The full name is visible under System info on the
control panel or the Drive composer PC tool.
_N/A_ = None.
-
07.26 Customization
package version
Customization package version number. Also visible under
System info on the control panel or the Drive composer PC
tool.
-
No. Name/Value Description Def/FbEq16
ACS580 FW.book Page 158 Wednesday, September 21, 2016 9:48 PM