54 Settings, I/O and diagnostics on the control panel
Reset to defaults
The Reset to defaults submenu s you to reset parameters and other settings.
Show in lists Show or hide the numeric IDs of:
• parameters and groups
• option list items
•bits
• devices in Options > Select drive
Show inhibit pop-up s or disables pop-up views showing information on
inhibits, for example when you try to start the drive
but it is prevented.
Menu item Description Corresponding
parameter
Reset fault and event
logs
Clears all events from the drive’s fault and event
logs.
96.51 Clear fault and
event logger
Reset home view
layout
Restores the home view layout back to show the
values of the default parameters defined by the
control macro in use.
96.06 Parameter
restore, selection Reset
home view
Reset non-HW
parameters
Restores all editable parameter values to default
values, except
• motor data and ID run results
• I/O extension module settings
• end user texts, such as customized warnings
and faults, and the drive name
• control panel/PC communication settings
• fieldbus adapter settings
• control macro selection and the parameter
defaults implemented by it
• parameter 95.02 HW options word 1 and the
differentiated defaults implemented by it.
96.06 Parameter
restore, selection
Restore defaults
Reset all fieldbus
settings
Restores all fieldbus and communication related
settings to default values.
Note: Fieldbus, control panel and PC tool
communication are interrupted during the restore.
96.06 Parameter
restore, selection Reset
all fieldbus settings
Menu item Description Corresponding
parameter
ACS580 FW.book Page 54 Wednesday, September 21, 2016 9:48 PM
To Next Page
Loading...
