184 Parameters
19
19 Operation mode
Selection of local and external control location sources and
operating modes.
See also section Operating modes of the drive (page 89).
19.01 Actual operation
mode
Displays the operating mode currently used.
See parameters 19.11…19.14.
This parameter is read-only.
-
Zero None. 1
Speed Speed control (in vector motor control mode). 2
Torque Torque control (in vector motor control mode). 3
Min The torque selector is comparing the output of the speed
controller (25.01 Torque reference speed control) and torque
reference (26.74 Torque ref ramp out) and the smaller of the
two is used (in vector motor control mode).
4
Max The torque selector is comparing the output of the speed
controller (25.01 Torque reference speed control) and torque
reference (26.74 Torque ref ramp out) and the greater of the
two is used (in vector motor control mode).
5
Add The speed controller output is added to the torque reference
(in vector motor control mode).
6
Reserved 7…9
Scalar (Hz) Frequency control in scalar motor control mode (in scalar
motor control mode).
10
Forced magn. Motor is in magnetizing mode. 20
19.11 Ext1/Ext2 selection Selects the source for external control location EXT1/EXT2
selection.
0 = EXT1
1 = EXT2
EXT1
EXT1 EXT1 (permanently selected). 0
EXT2 EXT2 (permanently selected). 1
FBA A MCW bit 11 Control word bit 11 received through fieldbus interface A. 2
DI1 Digital input DI1 (10.02 DI delayed status, bit 0). 3
DI2 Digital input DI2 (10.02 DI delayed status, bit 1). 4
DI3 Digital input DI3 (10.02 DI delayed status, bit 2). 5
DI4 Digital input DI4 (10.02 DI delayed status, bit 3). 6
DI5 Digital input DI5 (10.02 DI delayed status, bit 4). 7
DI6 Digital input DI6 (10.02 DI delayed status, bit 5). 8
Reserved 9…18
Timed function 1 Bit 0 of 34.01 Timed functions status (see page 255). 19
Timed function 2 Bit 1 of 34.01 Timed functions status (see page 255). 20
Timed function 3 Bit 2 of 34.01
Timed functions status (see page 255). 21
Reserved 22…24
Supervision 1 Bit 0 of 32.01 Supervision status (see page 248). 25
Supervision 2 Bit 1 of 32.01 Supervision status (see page 248). 26
Supervision 3 Bit 2 of 32.01 Supervision status (see page 248). 27
Reserved 28…31
No. Name/Value Description Def/FbEq16
ACS580 FW.book Page 184 Wednesday, September 21, 2016 9:48 PM
To Next Page
Loading...
