ABB ACS580 - Layout of the Control Panel

34 Control panel
To reinstall the control panel, put the bottom of the container in position (1a), press
the retaining clip at the top (1b) and push the control panel in at the top edge (1c).
Layout of the control panel
1 Layout of the control panel display 6 The arrow keys
2 Left softkey 7Stop (see Start and Stop)
3 Right softkey 8 Start (see Start and Stop)
4 Status LED, see chapter Maintenance
and hardware diagnostics, section
LEDs in the Hardware manual of the
drive.
9 Local/Remote (see Loc/Rem)
5 Help 10 USB connector
1a
1b
1c
4
3
6
7 8
5
10
2
9
1
ACS580 FW.book Page 34 Wednesday, September 21, 2016 9:48 PM