Fieldbus control through the embedded fieldbus interface (EFB) 415
State transition diagrams
State transition diagram for the ABB Drives profile
The diagram below shows the state transitions in the drive when the drive is using the
ABB Drives profile and the drive is configured to follow the commands of the control
word from the embedded fieldbus interface. The upper case texts refer to the states
which are used in the tables representing the fieldbus Control and Status words. See
sections Control Word for the ABB Drives profile on page 408 and Status Word for
the ABB Drives profile on page 412.
ACS580 FW.book Page 415 Wednesday, September 21, 2016 9:48 PM
To Next Page
Loading...
