ABB ACS580-07 - Introduction to the manual; Contents of this chapter; Applicability; Target audience

Introduction to the manual
Contents of this chapter
This chapter describes the manual in short and gives some general information for
the reader. This chapter also contains a quick reference guide for implementing a
safety system.
Applicability
This manual is applicable to ACS580-07, ACH580-07 and ACQ580-07 drives which have
the option: Emergency stop, stop category 0 with STO, with safety relays (option
+Q963).
This manual shows the default design of the safety circuit ordered with option code
+Q963. The actual design can be different from the default design because of
customer-defined modifications. Always refer to the documentation delivered with
the drive.
Target audience
This manual is intended for people who install, commission, use and service the safety
function. Read the manual before working on the unit. You are expected to know the
fundamentals of electricity, wiring, electrical components, electrical schematic symbols,
and functional safety.
2
Introduction to the manual 11