ABB ACS880-01-145A-3+N5350

To Next Page

To Previous Page

12-24 Startup Assistant & Parameters 3AXD50000011888

Table 12-4 Level 1 Parameter Block Deﬁnitions

Block Title

Parameter (Number)

Selection (Value)

Descriptions

WARNINGS

AND FAULTS

(Continued)

EVENT WORD 1 BIT 11

CODE (04.63)

Default: 0000h

Range: 0000h - FFFFh

Code of event. Selects the hexadecimal code of an event (warning,

fault or pure event) whose status is shown as bit 11 of 04.40 Event

word 1. The event codes are listed in chapter Fault tracing.

EVENT WORD 1 BIT 11 AUX

CODE (04.64)

Default: 0000 0000h

Range: 0000 0000h - FFFF FFFFh

Code of warning, fault or pure event. Species an auxiliary code for

the event selected by the previous parameter. The selected event is

indicated by the event word only if its auxiliary code matches the value

of this parameter.

With a value of 0000 0000h, the event word will indicate the event

regardless of the auxiliary code.

EVENT WORD 1 BIT 12

CODE (04.65)

Default: 0000h

Range: 0000h - FFFFh

Code of event. Selects the hexadecimal code of an event (warning,

fault or pure event) whose status is shown as bit 12 of 04.40 Event

word 1. The event codes are listed in chapter Fault tracing.

EVENT WORD 1 BIT 12 AUX

CODE (04.66)

Default: 0000 0000h

Range: 0000 0000h - FFFF FFFFh

Code of warning, fault or pure event. Species an auxiliary code for

the event selected by the previous parameter. The selected event is

indicated by the event word only if its auxiliary code matches the value

of this parameter.

With a value of 0000 0000h, the event word will indicate the event

regardless of the auxiliary code.

EVENT WORD 1 BIT 13

CODE (04.67)

Default: 0000h

Range: 0000h - FFFFh

Code of event. Selects the hexadecimal code of an event (warning,

fault or pure event) whose status is shown as bit 13 of 04.40 Event

word 1. The event codes are listed in chapter Fault tracing.

EVENT WORD 1 BIT 13 AUX

CODE (04.68)

Default: 0000 0000h

Range: 0000 0000h - FFFF FFFFh

Code of warning, fault or pure event. Species an auxiliary code for

the event selected by the previous parameter. The selected event is

indicated by the event word only if its auxiliary code matches the value

of this parameter.

With a value of 0000 0000h, the event word will indicate the event

regardless of the auxiliary code.

EVENT WORD 1 BIT 14

CODE (04.69)

Default: 0000h

Range: 0000h - FFFFh

Code of event. Selects the hexadecimal code of an event (warning,

fault or pure event) whose status is shown as bit 14 of 04.40 Event

word 1. The event codes are listed in chapter Fault tracing.

EVENT WORD 1 BIT 14 AUX

CODE (04.70)

Default: 0000 0000h

Range: 0000 0000h - FFFF FFFFh

Code of warning, fault or pure event. Species an auxiliary code for

the event selected by the previous parameter. The selected event is

indicated by the event word only if its auxiliary code matches the value

of this parameter.

With a value of 0000 0000h, the event word will indicate the event

regardless of the auxiliary code.

Main Page

ABB ACS880-01-145A-3+N5350 - Page 103

Table of Contents

Related product manuals