ABB ACS880-04 drive modules User Manual

ABB industrial drives
Application guide
ACS880-01 drives and ACS880-04 drive modules
Common DC systems

ABB ACS880-04 drive modules Specifications

General

Output Current	Up to 5200 A
Control Method	Direct Torque Control (DTC)
Cooling	Air, water
Communication Protocols	Ethernet, Modbus, Profibus, CANopen
Protection Class	IP20, IP54
Control Interface	fieldbus
Ambient Temperature Range	-10 to +50 °C

Summary

Introduction to the manual

Safety instructions

Guidance on safety measures to be followed when using the equipment.

Operation principle and hardware description

Common DC system overview and diagram

Describes the concept of a common DC system and its configuration.

Common DC system benefits and challenges

Drive circuit, charging types, and brake choppers

Illustrates main circuit diagrams, charging types, and brake choppers.

Planning – basics

Defining the DC link duty cycle

Guides on defining duty cycles and key variables for the DC link.

Planning – additional instructions

AC input connection and DC link construction

Fuse selection and phase loss protection

Guidelines for selecting fuses and implementing phase loss protection.

Control signals and drive parameters

How to connect control signals and set drive parameters for proper operation.

Technical data

Rectifier power capacity and power factor

DC link component values (contactors, resistance, capacitance)

Brake chopper ratings and DC voltage limits