ABB AT3-7R - Setting the time; AT3, AT3-R (24 hr version); AT3-7 R (7-day version)

2
Setting the time
AT3, AT3-R (24 hr version):
Turn the programming dial in clockwise direction to set the time read off the
24-hour dial opposite the marking.
Turn the transparent dial with the minutes pointer to set the time
precisely (the transparent dial be turned in both directions).
AT3-7R (7-day version):
Turn the dial in clockwise direction to set the time and to the marking.
Then proceed in the same way as for the AT3, AT3-R .